电容式传声器自由场互易校准数据处理系统设计

基于LabVIEW和Matlab软件开发平台设计了传声器自由场互易校准数据处理系统,该系统可以有效提取电转移阻抗信号,计算声中心和灵敏度级,并通过软件测试证明了系统的可行性。     

分布式创新中技术知识整合框架研究

基于演化、资源和知识的视角,提供了分布式创新中技术开发背景下技术知识整合的分析框架。从三个视角研究分布式创新要素,阐述了知识、知识转移和执行之间的结构关系,为企业整合知识资源,提高分布式创新能力提供借鉴和指导。     

L形声学谐振器的吸声特性试验

从试验方法、试验装置、试验数据处理等方面对如何有效测试L型声学谐振器法向和切向的吸声特性(包括吸声系数和声阻抗)展开了详细论述,并得出有一定工程价值的试验结论.     

基于刃边法的星载相机在轨MTF测量精度分析

调制传递函数(MTF)反映可见光对地遥感系统在对地物成像过程中信号的扩散与削弱程度,是表达系统辐射性能的重要指标.文章对星载可见光CCD相机在轨MTF主要测量方法进行比对分析,通过数据仿真,重点对随机噪声、边缘探测与拟合等主要影响刃边法精度的因素进行了分析.分析结果表明,计算所用刃边法能够较准确地计算可见光遥感系统的M...     

层板发汗冷却推力室传热分析

对于采用层板发汗冷却的推力室,为了最大限度地减少冷却剂流量,理想情况是,应根据不同轴向位置的受热情况来分配冷却剂流量,以使各处的壁面温度都控制在材料的许用温度内.本文运用有限体积法,对层板发汗冷却推力室内的燃气流动和壁面内的传热进行了数值模拟,同时通过调节冷却剂吹风比,使各处的壁面温度都控制在材料的许用温度之内.为综合...     

A low-thrust transfer between the Earth–Moon and Sun–Earth systems based on invariant manifolds

A low-energy, low-thrust transfer between two halo orbits associated with two coupled three-body systems is studied in this paper. The transfer is composed of a ballistic departure, a ballistic insertion and a powered phase using low-thrust propulsion to connect these two trajectories. The ballistic departure and insertion are computed by constructing the unstable and stable invariant manifolds of the corresponding halo orbits, and a complete low-energy transfer based on the patched invariant manifolds is optimized using the particle swarm optimization (PSO) algorithm on the criterion of smallest velocity discontinuity and limited position discontinuity (less than 1 km). Then, the result is expropriated as the boundary conditions for the subsequent low-thrust trajectory design. The fuel-optimal problem is formulated using the calculus of variations and Pontryagin's Maximum Principle in a complete four-body dynamical environment. Then, a typical bang–bang control is derived and solved using the indirect method combined with a homotopic technique. The contributions of the present work mainly consist of two points. Firstly, the global search method proposed in this paper is simply handled using the PSO algorithm, a number of feasible solutions in a fairly wide range can be delivered without a priori or perfect knowledge of the transfers. Secondly, the indirect optimization method is used in the low-thrust trajectory design and the derivations of the first-order necessary conditions are simplified with a modified controlled, restricted four-body model.     

Refinements in the data analysis of VIRTIS-M-IR Venus nightside spectra

The successful long-duration radiation measurements performed by the VIRTIS instrument aboard ESA’s Venus Express spacecraft have provided an excellent collection of atmospheric and surface data that stand out due to their high temporal and spatial coverage of the planet and due to a high diversity of measurement and environmental conditions.     

Measurements of heat transfer and pressure in a trailing edge cavity of a turbine blade

 An experimental investigation is conducted to obtain the heat transfer and pressure drop data for an integral trailing edge cavity test section that simulates a novel turbine blade's internal cooling passage with bleed holes. Local heat transfer is measured on both the suction and pressure sides by a transient liquid crystal technique, while pressures at six positions are recorded by pressure calibrators. Moreover, flow characteristic and its effect on heat transfer are analyzed for conditions with or without bleed flow. The experimental results show that, in the cases with bleed flow, local heat transfer on the pressure side exceeds that on the suction side in the first and second channels. In the cases without bleed flow, in the first and third channels, local heat transfer on the suction side weakens whilst it increases significantly on the pressure side. For the second channel, non-bleed condition leads to a more balanced heat transfer distribution between the upstream and downstream channel. Besides, after the bleed holes are blocked, heat transfer in the first bend region on the suction side declines sharply, while the opposite phenomenon occurs for the second bend region on the pressure side. In both bleed and non-bleed cases, the total pressure of six measurement positions decreases continuously along the channel at the same Reynolds number and it promotes for higher Reynolds number. Among all the measurement points, under the same flow rate condition, the highest speed occurs at Position 5, which also shows the maximum difference between the total and static pressures. When the bleed holes are blocked, the total pressure at each measurement position appears to increase.